Image above courtesy of Paul Wallace (Supercars of London)

Remapping a naturally aspirated car is perfectly possible, although the gains are considerably smaller than on something with forced induction.

As with turbocharged and supercharged engine remapping, remapping on engines without forced induction varies from engine to engine. For example, something that’s highly tuned like an E90 M3 might only gain 10 horsepower from a remap, but something that’s not highly tuned like a CV8 5.7-litre V8 Monaro with 330 horsepower from the factory might see a gain of 30, 40 or even 50 horsepower – a considerable gain that’s well worth having.

For drivers of 1.0-litre Peugeot 107s and 1.2-litre Ford Fiestas, a 15% increase in horsepower is usually achievable. For drivers of older performance cars like the Clio 172/ 182, a 10% increase in horsepower is usually achievable due to having less leeway with mechanical components.

Basically, the higher strung the engine as standard, the less the gains are going to be.

Looking past power gains, one thing that a remap is going to do is make your engine more eager to rev and smoother revving too. A remap on a naturally aspirated engine is rarely going to increase low-end pull, but it will pull sweeter to the upper ends of the rev range where peak power is made. On naturally aspirated cars, this is usually between 5500rpm and 7000rpm.

So, here’s what we at Hyperchips reckon:

You should get your naturally aspirated car remapped if:

  1. You want your engine to be more eager to rev;
  2. You want your engine to rev smoother;
  3. You want more top-end pull and peak power;
  4. You want better fuel economy from the above.

Remapping your naturally aspirated car may not be worth it if:

  1. You are looking for big power gains;
  2. Your car already has a high power output (e.g. E90/92/93 BMW M3).

If you have a naturally aspirated car, it will be worth getting in touch with Hyperchips to discuss the gains that a remap could have. We will be completely honest with you and tell you whether it’s worth it or not, and our remapping prices are highly competitive.

Turbocharged remapping vs. Naturally aspirated remapping

Whereas a 10% – 15% gain in power is the norm for a naturally aspirated engine, 20 – 50% gains in power and torque are normal for motors with forced induction.

Ten years ago, nearly all small-engined cars were naturally aspirated. It was rare to find a turbo on a small-engined car in 2005, unless it was a performance car or a diesel car.

Now, turbochargers are taking over and Audi, Ford, Vauxhall and Volkswagen are all offering turbocharged 1.0-litre or 1.2-litre engines on entry-level cars and turbocharged 1.4-litre and 2.0-litre engines on performance models such as the Audi S3 and Ford Fiesta ST.

The reason for this is that turbocharged engines are pound-for-pound more efficient than non-turbocharged engines and have a more usable power band. This increases flexibility and helps to satisfy EU emissions tests. The only downside for the consumer is that turbocharged engines cost more to buy than naturally aspirated engines, which is why plenty of manufacturers are still offering naturally aspirated engines, although these aren’t as efficient or as desirable.

For the tuning industry, the increase in turbocharged engines has led to a boost in the demand for remaps because they have greater tuning potential and there is now a better awareness than ever of the benefits a remap can have for a car and its owner. While there is still a demand for naturally aspirated engine remaps, the demand for turbocharged engines is greater.


Leave a Reply

Your email address will not be published. Required fields are marked *